This is our new product so we don't have any pretty pictures of installed fences yet. We are sure that your fence will look fantastic when erected correctly and would like to see your pictures on our projects page.
A set is W1.80*H1.80m and consists of:

​1. POST CAP

2. STRIP

3. POST

4. STEEL INSERT

5. TOP RAIL

6. BOTTOM RAIL

7. FENCING BOARD
Components
Fence Board
Post
Post Insert
Other Items & Fixings
Picture
Post Cap Option 1
Picture
Post Cap Option 2
Picture
Bottom Rail
Picture
Top Rail
Picture
Post Skirt
Picture
Strip
Installation
Method 1
Method 2
All fence post on any fence wether WPC or wood require a competant person to erect correctly. Once the posts are erected correctly the remaining components are fairly quick and easy to install.
  • Decide where you would like your fence.
  • Mark the post locations.
  • Dig the foundations for your post and secure them (ensure the correct distance between posts).
  • Either method above can be used to secure the post. 
  • Next fix the bottom rail.
  • Then start sliding the fence boards down in the groove of each post.
  • Ensure the fence boards are located correctly and there are no gaps.
  • Then finish off by placing the top rail and fencing caps on.​
If a fencing board is damaged replacing the board is easy.
​
  • Remove the fence cap.
  • Remove the top rail.
  • Slide all the boards above the damaged board up.
  • Remove the damaged board.
  • Slide all the boards down.
  • Install the new board on the top.
  • Fix the top rail.
  • Replace the post cap.
For general enquiries click the logo ​​​
G-C62NZX4L8X